Bright Promise for this Worx Task Light

Worx WX026L.9 20V LED Work Light.jpgFew of us get to choose where to do a DIY job. While sometimes you have all the room you need, with no twisting and kneeling required to get in position with a drill or saw, that’s the exception. Too often, you’re scrunched into the only corner with unmovable obstacles, and you’re working inches from the floor with too little light. Sure, you can get some help from a flashlight, a drill’s own built-in LED or a so-called trouble light. But you can’t count on getting to shine the light precisely where you need it, and keep it there. This is where Positec’s WORX 20V LED Work Light, Model WX026L.9, stands out.

The $50 price for the LED Work Light might seem steep, particularly since it doesn’t include the 20-volt battery and charger. But even if you’re putting the light to work in more spacious, unlit settings, such as a shed, the difference between this and traditional alternatives is clearly a game-changer.

Highly maneuverable
The WORX WX026L.9 has a 5.5- x 4-inch reflective lens in a sturdy frame that houses the base for any 20V WORX battery along with a rocker switch beneath a rubber membrane. The work light’s handle is a soft foam that feels good in your hand, and rubberized plastic helps protect any surface on which you set the light.

Yet the WX026L.9 doesn’t need a surface. Attached to the bottom of the frame, a rigid hook lets you hang the product like a trouble light. A notch in a plate attached to the lower frame allows mounting on a wall using a heavy nail. Or someone could hold it for you. Chances are, however, that you won’t need the help. By loosening two thumbscrews, you can swivel the light 360 degrees.

Another option, for lighting a larger space, is attaching the frame’s plate to a camera tripod through a hole provided. Depending on the tripod, the 1/4-20 bolt that screws into the camera might not be quite long enough to secure a nut. If that’s your situation, one of these little adapters could help.

Out of the dark
We first tested the WORX WX026L.9 for runtime on a fully charged, 2-Amp-hour battery, the $50 WA3525. The company claims that the older 1.5Ah battery, the $40 WA3520, will keep the light going for about 90 minutes. We measured 1 hour, 51 minutes on the 2.0-Ah battery and expect you could get roughly twice that on the 4.0-Ah battery, the $60 WA3578. For drilling, wiring or plumbing work, you might not need more time than that. If you routinely do, though, check out also the Ryobi 18V One+ Dual Power 20 Watt LED Work Light; it lets you also connect an AC extension cord for unlimited runtime. That product, which we haven’t gotten to review, costs $60 (no battery or charger) at Home Depot.

More dramatic than runtime was how much light the WX026L.9’s 1,500-lumen bulb delivers. We used an Extech Instruments lux meter to compare the product’s output against that of a 14.5-watt, 1,500-lumen household bulb—in first an unshaded lamp and then in a trouble light with the cage open. The same household bulb in the two different fixtures was roughly identical in brightness. But due to the WX026L.9’s wide reflective lens, the WORX was more than twice as bright. In nighttime use in a garage, shed and driveway, we had plenty enough for any task.

If you have to hold the WX026L.9 as you work, the product’s nearly five-pound weight can feel excessive after just a few minutes—the price of sturdiness. But keep in mind that the same two thumbscrews that permit swiveling (or securing the light at a given angle) can come off altogether, which lets you tote the light without its frame. This shaves a pound off the overall weight, though it also limits your options for hanging or mounting.

By June, the same light will also ship with one 1.5-Ah battery and the WA3742 five-hour charger. That $80 package will be the WORX WX026L, a bargain since the same items sold separately would cost $120. Prefer a 45-minute charge? You’d need to spring for the $50 WA3847. All products come with a three-year warranty against defects plus a 30-day satisfaction guarantee.

For work you’re stuck doing at nighttime or in dark spaces, the LED Work Light is bound to please. And if you already own a 20V battery and charger from other WORX products, such as the WORX TURBINE20V Cordless Blower, Model WG546.2, we tested in this roundup, you can feel not only enlightened but ahead of the game.

Share Button

For Generator Safety, GenTent Has You Covered

GenTent 10k StormbracerWe bet you never heard, while you were first shopping for a portable generator, that you couldn’t safely run the machine in the rain or snow. You wouldn’t splash water at an electrical outlet in your home, would you? But that’s exactly what the sky is doing to your portable generator while you’re running it outdoors unprotected during a storm.

You might be tempted to run the generator in your garage—just barely sheltered, with the exhaust pointed outward. Think again. Remind yourself that carbon monoxide from generators can kill everyone in the home, and there’s a reason experts recommend you keep the machine 20 feet away from your home. Then check out GenTent Safety Canopies, LLC, the only company that makes generator tents, a safe solution for more than 1,500 generators from 145 manufacturers.

Quick reality check: You can buy a cover for a portable generator for as little as $10, rather than $180 for the product we tested. But such covers are for storage alone; a generator that traps heat and emissions while running would quickly seize up. GenTent’s line, ranging in price from about $150 to $200, differs in that its canopies shelter the generator while permitting ample venting. It’s solely intended for portable generators; stationary generators, permanently installed outdoors, have their own weatherproof shielding.

We tested the 2017 version of the GenTent 10k Stormbracer, which adds UV treatment and resistance to cold down to -35o F. (All are flame-resistant and can resist wind up to 70 mph.) Whichever open-frame generator you own, the Stormbracer comes in a specific version for it. GenTent has also begun making tents for many closed-frame inverter generators. A few open-frame models, however, require special workarounds due to their designs. Some, for instance, have square rather than the round tubular frames to the product typically attaches. The company has developed several extra-cost adapter kits for most exceptions.

Installing the GenTent
GenTent matched the 10k Stormbracer we tested to a specific generator, the Generac GP7500E, though this version accommodates the majority of portables. The no-tools installation varies by which generator you own, and you tell the company your model to ensure you get the right canopy. For the Generac, we followed a three-step process outlined in the manual.

First, we attached one fiberglass/nylon clamp plus its rubber sleeve, which some models need, to each of the generator frame’s vertical corners. (The manual specifies how far beneath the generator’s electric panel to situate it.) The clamps’ length locks in place, and a lookup chart in the manual tells you which position is appropriate for your generator’s dimensions. Four fiberglass rods insert in the brackets, and their other ends meet in one fiberglass/nylon “central connector,” which forms the crown of the tent’s frame. The vinyl-coated polyester tent (in tan or gray, with black trim) slips over this frame, and elastic loops (outdoor-grade Gore-Tex) grips the brackets below.

Up to this step, the top of the generator is covered, but the sides are protected only a few inches down. One of two additional pieces included—one short, one long—attaches with Velcro beneath a flap that extends around the tent’s bottom edge. Depending on where the generator’s electrical panel is (and its length), you’ll attach one of the two pieces to cover the panel with enough wraparound on the adjacent sides to protect against rain blowing toward the generator from the side. Nothing covers the vicinity of the exhaust.

Checking or adding fuel is no problem: A hatch in the canopy, also firmly attached with Velcro, gave us ample access. Just remember to shut the generator and let it cool for five minutes before you add fuel.

GenTent versus nor’easter
GenTent invites customers to email them photos of your installed GenTent. For us, the company’s prompt reply suggested using the long rather than short electric-panel flap (for more wraparound) and better positioning of the stretchable loops beneath the canopy. We did not have to wait long for a storm to decisively test the GenTent.

What we got was a bitter nighttime nor’easter with a messy mix of sleet and heavy rain, GenTent 10k Stormbracerbacked by winds gusting to 50 miles per hour. We wheeled the generator out during the peak of the action, fired it up and had no issues, even given the GenTent’s panel covering, while connecting the unit to the transfer switch. A few drops of rain dampened lower components, but none reached where it could cause trouble, such as the panel or the electric-starter’s battery beneath.

With every major storm, more portable-generator owners learn about GenTent’s products, which protect your family as well as the generator. And since the best time to spring for a protective canopy is when you buy the generator itself, the company has launched the Covered by GenTent program, under which a generator maker will offer model-specific GenTents when you’re first buying the generator. Champion Power Equipment, the first generator manufacturer in the program, offers the product for much of its Storm Shield line. Other manufacturers could follow.

Stellar reviews on Tool to Power don’t come easy. But GenTent launched its product line months before Superstorm Sandy clobbered the northeast, and the company has only grown since. From our hands-on assessment, we can see why.

Share Button